The bimetal type temperature gauge series TB900, are made of two cold welded metal strips with different thermal expansion coefficient . They may be installed on every chemical, petrochemical plants, onshore and offshore applications, machinery, food and pharmaceutical industry as for EN 13190

The gas expansion temperature gauges series TM800, may be installed on every chemical, petrochemical plants, onshore and offshore applications and machinery, food and pharmaceutical industry as for EN 13190

The gas expansion temperature gauges series TM700 are suitable to be installed on engine, machines, or plants in presence of strong vibrations as for EN 13190

The gas expansion temperature gauges series TM400 are specific for panel mounting with standard case dimensions suitable for mounting in parallel with electric indicators.

The glass temperature gauges series TV1000, are particularly indicated for those industrial applications (petrochemical, air conditioning, food industry, chemical, etc. ) where there are difficulties of location . The adjustable angle of the stem and the further rotation of the case, permit an infinite range of possible installation allowing to the user to optimize the possibility of reading .

The glass temperature gauges with aluminium case series TV1006, are manufactured with ranges and relatives divisions of graduation according to the nominal dimensions.

The glass temperature gauges series TV1009, are particularly indicated for use in laboratory or where is required high reading accuracy .

Inserts (RTDs and thermocouples) with mineral insulation, without thermowells, according to DIN 43735, DIN 43762, IEC 751 and IEC 584

Thermocouple inserts. Common metal sensors with ceramic insulation, without thermowells, according to DIN 43732, DIN 43725 and IEC 584

Thermocouple inserts. Precious metal sensors in ceramic insulation, without thermowells, according to DIN 43732, DIN 43725 and IEC 584

RTDs and thermocouples with fast response, with 6 or 8 mm dia. insets, mineral insulation, and thermowells as forms 3, 3G and 3F, according to DIN 43772/T.2 Type T 21

RTDs and thermocouples with very fast response, with 3 mm dia. insets, mineral insulation, and thermowells derived from forms 2, 2G and 2F, according to DIN 43772/T.2 Type T 22

Thermocouple probes, with common metal sensors in ceramic inserts, and with thermowells in metal (AMK, AM) or in ceramic (AK) according to DIN 43733

Thermocouple probes. with precious metal sensors in ceramic insets, and with ceramic thermowells (AKK, AK) according to DIN 43733

Thermocouple probes for surfaces

RTDs and thermocouples, with 6 mm or 1/4? dia. insets, mineral insulation, and thermowells DIN 43772/T.2 , T.1 or ISA 125 , 127, according to ISA-dS 49

RTDs and thermocouples, insets with mineral insulation, without thermowells but with/without lag extensions, according toDIN 43772/T.2 and ISA-dS 49

RTDs and thermocouples, with 6 or 8 mm dia. inserts, mineral insulation, and thermowells as forms 6 and 6F, according to DIN 43772/T.2 T 31

Fast-response RTD probes with mineral insulation, with wire termination

Fast-response thermocouple probes with mineral insulation, with connector termination

Multipoint probes with multiple T/C (? 0.5 mm?6.0 mm) or RTD (?3 mm? 6.0 mm) sensors

desc